What’s up with Mesh?

Off-Grid Text Messaging with Mesh Radios

What are Meshtastic and MeshCore, and how can you try them for about the price of a pizza?

The Big Idea

Imagine texting your friends with no cell towers, no Wi-Fi, and no monthly bill. Small, battery-powered radios called nodes use a long-range, low-power radio technology called LoRa to pass short text messages to each other. Each node can also pass messages along for others, so together they form a mesh, a network that stretches farther than any single radio could reach.

YouYour friendNodeNodeNode (hilltop) Message hops node to node, with no internet needed

How It Works (In 3 Pieces)

Phone Bluetooth LoRa radio radio waves,miles away Other radio

1. A LoRa radio

A small board, often smaller than a deck of cards, with a battery and an antenna. This is the “node.”

2. Your phone

You type on a free app. It talks to your radio over Bluetooth. The radio does the rest.

3. Other nodes

Nearby radios pick up your message and relay it, so it can travel well past what one radio could reach.

Meshtastic vs. MeshCore

Both use the same kind of radio hardware and both are free, open-source projects. The big difference is how messages travel.

Meshtastic

Everyone helps. Most nodes rebroadcast what they hear, so messages spread outward like ripples in a pond. It is very easy to get going and has a huge community, map, and device list.

MeshCore

Dedicated repeaters. Your handheld “companion” node just sends and receives. Fixed repeater nodes on hills and rooftops carry messages along planned routes, which helps larger networks stay tidy.

Meshtastic Most nodes pass it on MeshCore RepeaterRepeater CompanionCompanion Repeaters carry the message
MeshtasticMeshCore
Cost to useFree after buying a radioFree after buying a radio
Best forEasy start, groups, hiking, eventsBigger planned networks, city or regional coverage
Who relays?Most nodesRepeater nodes
Phone appYes (Android, iOS)Yes (Android, iOS, web)
Same hardware?Many popular LoRa boards (such as Heltec) can run either one. You choose by installing the firmware.

Get Started in 4 Steps

  1. Buy a LoRa radio. For the US, get a 915 MHz model. Popular beginner picks include Heltec, RAK WisMesh, LILYGO T-Echo/T-Deck, and Seeed Wio boards. Make sure the antenna is attached before powering on.
  2. Install the firmware. Plug the radio into a computer with a data USB cable and use the web flasher in Chrome or Edge. Pick your device model and click flash.
  3. Install the phone app and pair with the radio over Bluetooth.
  4. Set your region to US and say hello on the public channel.
Beginner tips: Start with one radio and the phone app. Always attach the antenna before powering on, since transmitting without one can damage the radio. Range depends mostly on height, so a window, rooftop, or hilltop helps a lot. Our West Virginia hills can block signals, so repeaters on high ground make a big difference.

Questions? Come Ask a Ham

Mesh radio is a fun doorway into the wider world of amateur radio. Ask the club at a meeting or in our Facebook group, and see our Tech Study Guide if you would like to earn your own license.